Search our shop

4 Wire Hydraulic Hose SAE 100R12

Recommended for petroleum and water-bases hydraulic fluids in very high pressure applications. Long-lasting cover is well-suited for mobile hydraulics.

  • Cover: Synthetic Rubber
  • Reinforcement: Four spiral layers of high tensile steel wire reinforcement.
  • Inner Tube: Synthetic Rubber
  • Oil and abrasion resistant, gray synthetic rubber cover.
  • Temperature range: -40° to +250° Fahrenheit.
  • No skiving required
  • Exceeds SAE 100R12

SAE 100R12 HoseSpecifications

Item Inside Dia (in.) Outside Dia (in.) Max Working Pressure (PSI) Min Burst Pressure (PSI) Min, Bend Radius Coil Lenght.
R12-12 3/4" 1.22" 4,000 16,000 4.7" 100 FT
R12-16 1" 1.496" 4,000 16,000 6" 100 FT
R12-20 1-1/4" 1.811" 3,000 12,000 8.2" 100 FT
R12-24 1-1/2" 2.087" 2,500 10,000 10" 100 FT
R12-32 2" 2.598" 2,500 10,000 12.5" 100 FT

This hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

Not suitable for hydraulic fluids on phosphate ester basis (HFD).

*Coil lengths vary in length depending on current stock at time of order. Charges will be adjusted to length being supplied at time of shipment